Skip To The Main Content
Forums / MeshWorks Hardware / Meshworks I2C

Meshworks I2C

2 posts, 0 answered
  1. LuTopia avatar
    LuTopia
    4 posts
    Registered:
    03 Mar 2015
    15 Apr 2015
    I would like to use this for my senior design project to control a sensor that I bought from SparkFun, it's and I2C display like you show in your movies, How do I do that?
  2. vreinhardt avatar
    vreinhardt
    53 posts
    Registered:
    08 Jul 2014
    15 Apr 2015 in reply to LuTopia
    Hi LuTopia

    In our combined demo we are using an Adafruit Small 1.2" 8x8 LED Matrix w/I2C Backpack.  Under CEL-MeshConnect GitHub site you can download our demo script.  You will need to wire the display to our External I/O connector shown in our MeshWorks Developement Kit User Guide.

    Please take a look at display.py and fluid_level_sensor_with_tick.py.  The level sensor script is sending a valuse to the display script.  The display script is using those values to write I2C command to the display.

    Regards,

    VR