Skip To The Main Content
buy_kit

EM35x Ember Companion Kit

CEL's MeshConnect EM35x Ember Companion Kit is designed to work with the Ember development kits [EM35X-DEV and EM35X-DEV-IAR]. Each module in this CEL kit is soldered on a carrier board making it pin-for-pin compatible with the Ember development board.
The Hardware Contents of this kit are:

• 6 MeshConnect Mini Modules (ZICM357SPx-1x and ZICM3588SPx-1x). Each Module is mounted on a daughter card (soldered on a carrier board) ready to plug into the Ember EM35x development boards.
• (1) ZICM357SP0-1C on carrier board / EM357 IC, +8dBm output power with RF port for external antenna
• (1) ZICM357SP2-1 on carrier board / EM357 IC, +20dBm output power with PCB trace antenna
• (1) ZICM357SP2-1C on carrier board / EM357 IC, +20dBm output power with RF port for external antenna
• (1) ZICM3588SP0-1C on carrier board / EM3588 IC, +8dBm output power with RF port for external antenna
• (1) ZICM3588SP2-1 on carrier board / EM3588 IC, +20dBm output power with PCB trace antenna
• (1) ZICM3588SP2-1C on carrier board / EM3588 IC, +20dBm output power with RF port for external antenna

For more details on the specs of these Modules, please see MeshConnect EM35x Module datasheet.

The Software Contents of this kit are:
    •    None. No firmware/source code is programmed on the MeshConnect modules

Related Documents

    •    MeshConnect EM35x Mini Modules Datasheet
    •    Technical User Guide

Ordering Information

ZICM-EM35X-DEV-KIT-3